The first reason for the belt filter to stop working should be that the water channel in the equipment is blocked. When some of the water channels in the equipment are blocked, the filtrate cannot enter the equipment or cannot be excluded from the equipment, so that the belt filter equipment will su

Three problems should be paid attention to when the belt filter is overhauled:a. The problem of the surface accuracy of the rubber roller of the press roller occurs when the roller surface of the press roller is damaged or re-coated/plasticized. The rubber roller surface is damaged, the outer circle

The rubber belt filter is out of service in a high temperature environment, so what should be done? Generally, when the rubber belt filter is out of service, a lot of untreated materials are left in the pipeline that transports the filtrate. These materials contain a lot of solid particles, whic

Take the fixed chamber belt vacuum filter as an example. Only a few small belt-type vacuum filters can be installed as a whole, and most of them are assembled at the installation site. The installation procedure is as follows:(1) Rack, the rack and the frame are leveled at the same time, the rac

Working principle of belt vacuum filter: The slurry with low solid content is evenly distributed on the filter cloth through the feeding device. The vacuum box is sucked by the vacuum pump to make the vacuum box reach a certain degree of vacuum, so that a pressure difference is generated between the