News activities
What should I do if the belt filter suddenly stops working? How to do it correctly?
2021-11-09
The first reason for the belt filter to stop working should be that the water channel in the equipment is blocked. When some of the water channels in the equipment are blocked, the filtrate cannot enter the equipment or cannot be excluded from the equipment, so that the belt filter equipment will su
2021-11-09
What problems should be paid attention to when the belt filter is overhauled?
2021-11-09
Three problems should be paid attention to when the belt filter is overhauled:a. The problem of the surface accuracy of the rubber roller of the press roller occurs when the roller surface of the press roller is damaged or re-coated/plasticized. The rubber roller surface is damaged, the outer circle
2021-11-09
What should I do if the rubber belt filter is out of operation in a high temperature environment?
2021-11-09
The rubber belt filter is out of service in a high temperature environment, so what should be done? Generally, when the rubber belt filter is out of service, a lot of untreated materials are left in the pipeline that transports the filtrate. These materials contain a lot of solid particles, whic
2021-11-09
What is the installation procedure of the belt vacuum filter?
2021-11-09
Take the fixed chamber belt vacuum filter as an example. Only a few small belt-type vacuum filters can be installed as a whole, and most of them are assembled at the installation site. The installation procedure is as follows:(1) Rack, the rack and the frame are leveled at the same time, the rac
2021-11-09
How to install and debug the vacuum filter?
2021-11-09
Working principle of belt vacuum filter: The slurry with low solid content is evenly distributed on the filter cloth through the feeding device. The vacuum box is sucked by the vacuum pump to make the vacuum box reach a certain degree of vacuum, so that a pressure difference is generated between the
2021-11-09