How to store the vacuum filter before and after installation?
1. Pay attention to the following points when storing the equipment before installation:
(1) The equipment should be stored in the normal operating position, if possible, should be placed in a dry, well-ventilated room.
(2) When the equipment is stored outdoors under special circumstances, it should be covered with a tarp to ensure sufficient ventilation.
(3) The tape should be kept on the filter during storage and placed loosely.
2. The following points should be paid attention to when storing the equipment after installation:
(1) If the filter is not used within two months after installation, the power supply should be kept connected for regular operation to lubricate the moving surface.
(2) Appropriate rust inhibitors should be applied to all rusted parts, and the rust of the structure should be checked frequently.
What are the installation requirements for the vacuum filter?
The vacuum filter must be installed horizontally on reinforced concrete or components and fixed with anchor bolts. The foundation is generally upstairs or above 0.4 meters. The host should meet the following requirements after installation:
(1) The longitudinal straightness of the sliding table of the vacuum device is ±1.5mm.
(2) The parallelism between the top surface of the friction belt and the top surface of the sliding table is ±0.5mm.